Aqua Engineering

• Excellent finish
• Sturdy construction
• Rust proof

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / BS EN 12266-I (BS 6755-I)
• Face to Face: Mfg. Std.
• End Connection: Flanged End to ANSI B 16.5 / BS 10 Table "D" “E” Screwed End to ANSI B 1.2O.1
• Size Range: 1/2" to 6"
• Pressure Rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic, Electrical Actuator

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you “see” the valve’s position. The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves.

• Single Piece Screwed end
• Two Piece Screwed / Flanged end
• Three Pice Screwed / Flanged end
• Forged Steel Screwed / Socket end

Materials:
WCB, WC6, WC9 CF8, CF8M, CF3, CF3M, LCB, LCC, Hastelloy, Hastelloy C, Duplex, Monel, and others

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you “see” the valve’s position. The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves.

• Single Piece Screwed end
• Two Piece Screwed / Flanged end
• Three Pice Screwed / Flanged end
• Forged Steel Screwed / Socket end

Materials:
WCB, WC6, WC9 CF8, CF8M, CF3, CF3M, LCB, LCC, Hastelloy, Hastelloy C, Duplex, Monel, and others

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you “see” the valve’s position. The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves.

• Single Piece Screwed end
• Two Piece Screwed / Flanged end
• Three Pice Screwed / Flanged end
• Forged Steel Screwed / Socket end

Materials:
WCB, WC6, WC9 CF8, CF8M, CF3, CF3M, LCB, LCC, Hastelloy, Hastelloy C, Duplex, Monel, and others

• Strong construction
• Rust proof
• Finely finished

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator

• Resistant to corrosion
• Resistance against wear
• Accurate dimensions

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator

• Rigid construction
• Corrosion-resistance
• Abrasion resistance

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator

• Durability
• Corrosion resistance
• Easy to fit

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator

• Ruggedly constructed
• Sturdy design
• Highly durable
• Type: Single piece, two piece & three piece

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Socket Weld End To Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator

• Corrosion-resistance
• Accurate dimensions
• Sturdiness

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator

The operation of the ball valve is mentioned below:

• The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur
• When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked
• The handle or lever will be incline with the port position letting you "see" the valve's position
• The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator

Additional Information:

• Port of Dispatch: Ahmedabad, India
• Delivery Time: As per the Order
• Packaging Details: Export Packing (As per the Suitable in Air/Cargo/Shipping Consignment)

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you “see” the valve’s position. The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves.

• Single Piece Screwed end
• Two Piece Screwed / Flanged end
• Three Pice Screwed / Flanged end
• Forged Steel Screwed / Socket end

Materials:
WCB, WC6, WC9 CF8, CF8M, CF3, CF3M, LCB, LCC, Hastelloy, Hastelloy C, Duplex, Monel, and others

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you “see” the valve’s position. The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves.

• Single Piece Screwed end
• Two Piece Screwed / Flanged end
• Three Pice Screwed / Flanged end
• Forged Steel Screwed / Socket end

Materials:
WCB, WC6, WC9 CF8, CF8M, CF3, CF3M, LCB, LCC, Hastelloy, Hastelloy C, Duplex, Monel, and others

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you “see” the valve’s position. The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves.

• Single Piece Screwed end
• Two Piece Screwed / Flanged end
• Three Pice Screwed / Flanged end
• Forged Steel Screwed / Socket end

Materials:
WCB, WC6, WC9 CF8, CF8M, CF3, CF3M, LCB, LCC, Hastelloy, Hastelloy C, Duplex, Monel, and others

We are engaged in offering a comprehensive range of Jacketed Ball valve. Our offered valve are quality tested on predefined parameters to meet the international standards. These valve are made up using high grade raw material under the guidance of skilled team of professionals.

Features & Specifications:

• Excellent finish
• Sturdy construction
• Rust proof
• Design Standard: BS EN ISO 17292 (BS 5351) ASME B 16.34 / BS EN ISO 12516
• Inspection and Testing Standard: API 598 / BS EN 12266 I (BS 6755-I)
• Face to Face: As per ANSI B 16.10 / Mfg. Std.
• End Connection: Flanged End to ANSI B 16.5 / BS 10 Table "D" 'E"
• Size Range: 1/12" X 1" to 6" X 10"
• Pressure Rating: 150# / 300#
• Operation: Hand Lever / Gear / Pneumatic, Electrical Actuator

• Ruggedly constructed
• Sturdy design
• Highly durable

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Socket Weld End To Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator

• Durable finish standard
• Sturdy design
• Long lasting life

Specifications:

• Design Standard: BS EN ISO 17292 (BS 5351) / API 6D / ASME B 16.34 / BE EN ISO 12516
• Inspection and Testing Standard: API 598 / API 6D / BS EN 12266 I
• Fire Safe Testing: API 607 / BS EN ISO 12266 I
• Face to Face: As per ANSI B 16.10
• End Correction: Flanged End to ANSI B 16.5 / BS 10 | Screwed End to ANSI B 1.20.1 | Buttweld End to ANSI B 16.25
• Size Range: 1/2" to 12"
• Pressure rating: 150#/300#
• Operation: Hand Lever / Gear / Pneumatic. Electrical Actuator